Tankguard Type II phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard Type II — product overview
This is a two-component phenolic epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of carbon steel.
Tankguard Type II — positioning
Tankguard Type II is a phenolic epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
It is used for protective coating work in atmospheric exposure conditions.
Tankguard Type II — key data
| Model | Tankguard Type II |
|---|---|
| Manufacturer product name | 0P4 |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Colour range | Munsell 5G8/4/Munsell N6.5/Munsell N9.5 |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 100 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 100 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-type-ii.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 15 h | 6 h | 1.5 h |
| Walk-on dry | 30 h | 12 h | 4 h |
| Recoat, minimum | 30 h | 12 h | 4 h |
| Dried/cured for service | 15 d | 7 d | 4 d |
Data taken from the manufacturer's TDS jotun-tankguard-type-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Tankguard Type II — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Tankguard Type II, send a request at the foot of this page, or contact us on WhatsApp or by email.
Tankguard Type II — common questions
Which substrates can Tankguard Type II be used on?
The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Tankguard Type II?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Tankguard Type II have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Tankguard Type II
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard Type II
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net