Offshore steel structures and ship coating (heavy-duty)
Model

Jotaprime 510 phenolic epoxy

Jotaprime 510 (0WM) is the phenolic epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers fast-drying / high-build / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotaprime 510.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotaprime 510 — product overview

Jotaprime 510 belongs to the phenolic epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service / low-temperature application; application and system notes are set out below.

Jotaprime 510 — positioning

Jotaprime 510 (0WM) — in the Jotun range — is a phenolic epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service / low-temperature application conditions apply.

The substrate for this product is carbon steel / galvanised steel / stainless steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where fast-drying / high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.

Jotaprime 510 — key data

ModelJotaprime 510
Manufacturer product name0WM
Resin systemphenolic epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel / galvanised steel / stainless steel
Key characteristicsfast-drying / high-build / abrasion-resistant
Colour rangeAluminium red / Grey
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids75 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point35 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotaprime-510.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C-5 °C0 °C5 °C10 °C23 °C40 °C
Touch dry26 h14 h10 h6 h5 h2 h1 h
Walk-on dry96 h48 h30 h16 h10 h5 h2 h
Recoat, minimum42 h24 h18 h10 h7 h4 h2 h

Data taken from the manufacturer's TDS jotun-jotaprime-510.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel and the corrosivity of the atmospheric exposure / immersion service / low-temperature application environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotaprime 510 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotaprime 510 and the intended use.

Jotaprime 510 — common questions

What service environment suits Jotaprime 510?

The service environment for this model is atmospheric exposure / immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Jotaprime 510 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Jotaprime 510?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Jotaprime 510

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotaprime 510

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat