Tankguard Type III phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard Type III — product overview
Tankguard Type III belongs to the phenolic epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.
Tankguard Type III — positioning
Tankguard Type III is the phenolic epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.
The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure / immersion service.
Tankguard Type III — key data
| Model | Tankguard Type III |
|---|---|
| Manufacturer product name | 0U8 |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel |
| Colour range | Munsell 5G8/4/Munsell N6.5/Munsell N9.5 |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 100 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 100 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-type-iii.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 15 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 12 h | 8 h | 2 h |
| Walk-on dry | 24 h | 16 h | 8 h |
| Recoat, minimum | 24 h | 16 h | 8 h |
| Dried/cured for service | 7 d | 3 d | 2 d |
Data taken from the manufacturer's TDS jotun-tankguard-type-iii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Tankguard Type III follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Tankguard Type III — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
For the full technical data on Tankguard Type III, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Tankguard Type III — common questions
Which coat does Tankguard Type III take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Tankguard Type III?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Tankguard Type III?
This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Tankguard Type III
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard Type III
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net