Tankguard NCV phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard NCV — product overview
This is a two-component phenolic epoxy product, typically used as primer / intermediate coat. It is characterised by chemical-resistant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / stainless steel.
Tankguard NCV — positioning
Tankguard NCV is the phenolic epoxy primer / intermediate coat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
The model is notable for chemical-resistant.
Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.
Tankguard NCV — key data
| Model | Tankguard NCV |
|---|---|
| Manufacturer product name | 0H2 |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / stainless steel |
| Key characteristics | chemical-resistant |
| Colour range | Light grey / light red |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ |
| Volume solids | 63 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 28 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-ncv.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -5 °C | 0 °C | 5 °C | 10 °C | 15 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|---|
| Touch dry | 12 h | 10 h | 5 h | 4 h | 3 h | 2 h | 1 h |
| Walk-on dry | 48 h | 30 h | 16 h | 12 h | 10 h | 8 h | 4 h |
| Recoat, minimum | 24 h | 20 h | 10 h | 8 h | 6 h | 4 h | 2 h |
| Dried/cured for service | 30 d | 21 d | 14 d | 10 d | 8 d | 6 d | 3 d |
Data taken from the manufacturer's TDS jotun-tankguard-ncv.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel and the corrosivity of the atmospheric exposure / immersion service environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Tankguard NCV — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Tankguard NCV, send a request at the foot of this page, or contact us on WhatsApp or by email.
Tankguard NCV — common questions
Where can I find the technical data for Tankguard NCV?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Tankguard NCV take in the system?
This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Tankguard NCV?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Tankguard NCV
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard NCV
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net