Tankguard Storage HS phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard Storage HS — product overview
two-component phenolic epoxy product for use as primer / intermediate coat / topcoat; chemical-resistant; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.
Tankguard Storage HS — positioning
Jotun's Tankguard Storage HS is a phenolic epoxy primer / intermediate coat / topcoat for atmospheric exposure / immersion service conditions, supplied with its technical documentation.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
The model is notable for chemical-resistant.
It is used for protective coating work in atmospheric exposure / immersion service conditions.
Tankguard Storage HS — key data
| Model | Tankguard Storage HS |
|---|---|
| Manufacturer product name | 6R6 |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete |
| Key characteristics | chemical-resistant |
| Colour range | Light grey / light red |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ |
| Volume solids | 72 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 34 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-storage-hs.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -5 °C | 0 °C | 5 °C | 10 °C | 15 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|---|
| Touch dry | 12 h | 10 h | 5 h | 4 h | 3 h | 2 h | 1 h |
| Walk-on dry | 48 h | 30 h | 16 h | 12 h | 10 h | 8 h | 4 h |
| Recoat, minimum | 24 h | 20 h | 10 h | 8 h | 6 h | 4 h | 2 h |
| Dried/cured for service | 30 d | 21 d | 14 d | 10 d | 8 d | 6 d | 3 d |
Data taken from the manufacturer's TDS jotun-tankguard-storage-hs.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- IMO Res.288(87)
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- NACE No. 6
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Tankguard Storage HS — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Tankguard Storage HS, send a request at the foot of this page, or contact us on WhatsApp or by email.
Tankguard Storage HS — common questions
Which coat does Tankguard Storage HS take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Tankguard Storage HS?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Tankguard Storage HS?
This model offers chemical-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Tankguard Storage HS
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard Storage HS
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net