Tankguard Plus phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard Plus — product overview
two-component phenolic epoxy product for use as primer / intermediate coat / topcoat; chemical-resistant; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service / high temperature.
Tankguard Plus — positioning
Tankguard Plus (0J7) — in the Jotun range — is a phenolic epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service / high temperature conditions apply.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
It suits projects where chemical-resistant matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / immersion service / high temperature conditions.
Tankguard Plus — key data
| Model | Tankguard Plus |
|---|---|
| Manufacturer product name | 0J7 |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service / high temperature |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete |
| Key characteristics | chemical-resistant |
| Colour range | Light yellow / White |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ |
| Volume solids | 70 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 28 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-plus.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 15 °C | 23 °C | 30 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 24 h | 16 h | 6 h | 4 h | 3 h | 2 h |
| Walk-on dry | 36 h | 24 h | 10 h | 7 h | 5 h | 3 h |
| Recoat, minimum | 52 h | 36 h | 30 h | 20 h | 14 h | 10 h |
| Dried/cured for service | 14 d | 10 d | 7 d | 5 d | 4 d | 3 d |
Data taken from the manufacturer's TDS jotun-tankguard-plus.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- NACE No. 6
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Tankguard Plus — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
For the full technical data on Tankguard Plus, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Tankguard Plus — common questions
Which coat does Tankguard Plus take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Tankguard Plus?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Tankguard Plus?
This model offers chemical-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Tankguard Plus
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard Plus
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net