Balloxy BT modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Balloxy BT — product overview
This is a two-component modified epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by fast-drying / high solids / high-build / surface-tolerant / ballast tanks; service environment atmospheric exposure / immersion service / low-temperature application; suitable for protective coating of carbon steel / galvanised steel / stainless steel / coated surfaces.
Balloxy BT — positioning
Balloxy BT is a modified epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service / low-temperature application.
The substrate for this product is carbon steel / galvanised steel / stainless steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where fast-drying / high solids / high-build / surface-tolerant / ballast tanks are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure / immersion service / low-temperature application.
Balloxy BT — key data
| Model | Balloxy BT |
|---|---|
| Manufacturer product name | 0F9 |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service / low-temperature application |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / coated surfaces |
| Key characteristics | fast-drying / high solids / high-build / surface-tolerant / ballast tanks |
| Colour range | Aluminium red / Grey |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 72 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 30 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-balloxy-bt.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -5 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 13 h | 10 h | 7.5 h | 5 h | 2.5 h | 1 h |
| Walk-on dry | 44 h | 27 h | 14 h | 8 h | 5 h | 2 h |
| Recoat, minimum | 24 h | 18 h | 10 h | 6 h | 4 h | 2 h |
Data taken from the manufacturer's TDS jotun-balloxy-bt.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / coated surfaces), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- IMO Res.215(82)
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Balloxy BT — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Balloxy BT, send a request at the foot of this page, or contact us on WhatsApp or by email.
Balloxy BT — common questions
Which coat does Balloxy BT take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Balloxy BT?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Balloxy BT?
This model offers fast-drying / high solids / high-build / surface-tolerant / ballast tanks. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Balloxy BT
- Balloxy HB Light
- Jotamastic 80 Aluminium
- Jotamastic 80 MIO
- Jotamastic 87
- Jotamastic 87 Aluminium
- Jotamastic 90
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Balloxy BT
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net