Tankguard Type I phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard Type I — product overview
This is a two-component phenolic epoxy product, typically used as intermediate coat / topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel.
Tankguard Type I — positioning
Tankguard Type I belongs to the phenolic epoxy family of Jotun protective coatings and is used as intermediate coat / topcoat in atmospheric exposure / immersion service service.
Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure / immersion service.
Tankguard Type I — key data
| Model | Tankguard Type I |
|---|---|
| Manufacturer product name | 0L5 |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel |
| Colour range | Munsell 5G8/4/Munsell N6.5/Munsell N9.5 |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ |
| Volume solids | 81 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 28 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-type-i.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 15 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 16 h | 6 h | 4 h | 2 h |
| Walk-on dry | 24 h | 10 h | 6 h | 3 h |
| Recoat, minimum | 48 h | 30 h | 20 h | 10 h |
| Dried/cured for service | 14 d | 10 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-tankguard-type-i.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure / immersion service environment.
Standards and approvals
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Tankguard Type I — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Tankguard Type I, send a request at the foot of this page, or contact us on WhatsApp or by email.
Tankguard Type I — common questions
Where can I find the technical data for Tankguard Type I?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Tankguard Type I take in the system?
This model is typically used as intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Tankguard Type I?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Tankguard Type I
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard Type I
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net