Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard Type III phenolic epoxy

Tankguard Type III is the phenolic epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard Type III.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard Type III — product overview

Tankguard Type III belongs to the phenolic epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.

Tankguard Type III — positioning

Tankguard Type III is the phenolic epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: atmospheric exposure / immersion service.

Tankguard Type III — key data

ModelTankguard Type III
Manufacturer product name0U8
Resin systemphenolic epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel
Colour rangeMunsell 5G8/4/Munsell N6.5/Munsell N9.5
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids100 %
Density (specific gravity)1.5 kg/l
Flash point100 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-type-iii.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature15 °C23 °C40 °C
Touch dry12 h8 h2 h
Walk-on dry24 h16 h8 h
Recoat, minimum24 h16 h8 h
Dried/cured for service7 d3 d2 d

Data taken from the manufacturer's TDS jotun-tankguard-type-iii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Tankguard Type III follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Tankguard Type III — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

For the full technical data on Tankguard Type III, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Tankguard Type III — common questions

Which coat does Tankguard Type III take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Tankguard Type III?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Tankguard Type III?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

Models related to Tankguard Type III

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard Type III

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat