Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard Plus phenolic epoxy

Jotun's Tankguard Plus is a phenolic epoxy primer / intermediate coat / topcoat for atmospheric exposure / immersion service / high temperature conditions, supplied with its technical documentation. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard Plus.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard Plus — product overview

two-component phenolic epoxy product for use as primer / intermediate coat / topcoat; chemical-resistant; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service / high temperature.

Tankguard Plus — positioning

Tankguard Plus (0J7) — in the Jotun range — is a phenolic epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service / high temperature conditions apply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where chemical-resistant matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure / immersion service / high temperature conditions.

Tankguard Plus — key data

ModelTankguard Plus
Manufacturer product name0J7
Resin systemphenolic epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / high temperature
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicschemical-resistant
Colour rangeLight yellow / White
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids70 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point28 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-plus.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C15 °C23 °C30 °C40 °C
Touch dry24 h16 h6 h4 h3 h2 h
Walk-on dry36 h24 h10 h7 h5 h3 h
Recoat, minimum52 h36 h30 h20 h14 h10 h
Dried/cured for service14 d10 d7 d5 d4 d3 d

Data taken from the manufacturer's TDS jotun-tankguard-plus.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Tankguard Plus — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

For the full technical data on Tankguard Plus, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Tankguard Plus — common questions

Which coat does Tankguard Plus take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Tankguard Plus?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Tankguard Plus?

This model offers chemical-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

Models related to Tankguard Plus

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard Plus

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat