Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard Flexline phenolic epoxy

Tankguard Flexline (6C4) is the phenolic epoxy topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard Flexline.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard Flexline — product overview

Tankguard Flexline belongs to the phenolic epoxy system and is a two-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.

Tankguard Flexline — positioning

Tankguard Flexline (6C4) is the phenolic epoxy topcoat in the Jotun range; this page sets out its system position, parameters and supply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where chemical-resistant matters — tight application windows or demanding maintenance regimes.

Typical service environment: atmospheric exposure.

Tankguard Flexline — key data

ModelTankguard Flexline
Manufacturer product name6C4
Resin systemphenolic epoxy
Componentstwo-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Suitable substratescarbon steel
Key characteristicschemical-resistant
Colour rangeGrey / light green / pink
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids71 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point28 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-flexline.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C15 °C23 °C30 °C40 °C
Touch dry14 h6 h5 h4 h3 h
Walk-on dry24 h10 h8 h5 h4 h
Recoat, minimum24 h20 h18 h15 h12 h

Data taken from the manufacturer's TDS jotun-tankguard-flexline.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Tankguard Flexline — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Tankguard Flexline, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Tankguard Flexline — common questions

Where can I find the technical data for Tankguard Flexline?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Tankguard Flexline take in the system?

This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Tankguard Flexline?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Tankguard Flexline

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard Flexline

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat