Resist 18 WF zinc-rich
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Resist 18 WF — product overview
Resist 18 WF belongs to the zinc-rich system and is a two-component product used as primer; service environment immersion service; application and system notes are set out below.
Resist 18 WF — positioning
Resist 18 WF is a zinc-rich primer from the Jotun range, formulated for steel structures in immersion service.
Three things decide the system: the substrate (steel), the service environment (immersion service) and the design life. Together they set the number of coats and the total film thickness.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Service environments include immersion service; send the actual conditions for anything outside that range.
Resist 18 WF — key data
| Model | Resist 18 WF |
|---|---|
| Manufacturer product name | 3WD |
| Resin system | zinc-rich |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | immersion service |
| Colour range | Grey |
| Application method | airless spray / brush / conventional spray |
| Surface preparation grade | sa 2½ |
| Volume solids | 57 % ± 2 % |
| Density (specific gravity) | 2.9 kg/l |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-resist-18-wf.pdf) |
Application and system notes
Application: airless spray / brush / conventional spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Walk-on dry | 80 min | 20 min | 10 min |
| Dried/cured for service | 10 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-resist-18-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the immersion service environment.
Standards and approvals
- ASTM D520
- GB 30981-2020
- GB 38508-2020
- ISO 12944-2
- ISO 12944-5
- ISO 2813
- ISO 3679
- ISO 8501-1
Standards and approvals for Resist 18 WF follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Resist 18 WF — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Resist 18 WF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Resist 18 WF — common questions
How many components does Resist 18 WF have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Resist 18 WF?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Resist 18 WF take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Resist 18 WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Resist 18 WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net