Offshore steel structures and ship coating (heavy-duty)
Model

Baltoflake unsaturated polyester

Jotun's Baltoflake is a unsaturated polyester primer / intermediate coat / topcoat for atmospheric exposure / immersion service conditions, supplied with its technical documentation. This model offers high-build / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Baltoflake.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Baltoflake — product overview

Baltoflake belongs to the unsaturated polyester system and is a four-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.

Baltoflake — positioning

A unsaturated polyester primer / intermediate coat / topcoat in the Jotun range, Baltoflake (0BT) is selected for steel structures exposed to atmospheric exposure / immersion service.

Three things decide the system: the substrate (carbon steel / stainless steel), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

It suits projects where high-build / abrasion-resistant matters — tight application windows or demanding maintenance regimes.

Typical service environment: atmospheric exposure / immersion service.

Baltoflake — key data

ModelBaltoflake
Manufacturer product name0BT
Resin systemunsaturated polyester
Componentsfour-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel
Key characteristicshigh-build / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray
Surface preparation gradesa 2½
Volume solids96 % ± 2 %
Density (specific gravity)1.2 kg/l
Flash point34 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-baltoflake.pdf)

Application and system notes

Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry3 h2 h2 h
Walk-on dry5 h2 h2 h
Recoat, minimum5 h2 h2 h
Dried/cured for service4 d2 d1 d

Data taken from the manufacturer's TDS jotun-baltoflake.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / stainless steel / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Baltoflake — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

For the full technical data on Baltoflake, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Baltoflake — common questions

How is the recoat interval for Baltoflake controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Baltoflake be used on?

The TDS lists the substrate as carbon steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Baltoflake?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Baltoflake

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Baltoflake

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat