Offshore steel structures and ship coating (heavy-duty)
Model

Baltoflake Ecolife unsaturated polyester

Baltoflake Ecolife () — in the Jotun range — is a unsaturated polyester product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service conditions apply. This model offers high-build / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Baltoflake Ecolife.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Baltoflake Ecolife — product overview

three-component unsaturated polyester product for use as primer / intermediate coat / topcoat; high-build / abrasion-resistant; substrates carbon steel / stainless steel; service environment atmospheric exposure / immersion service.

Baltoflake Ecolife — positioning

A unsaturated polyester primer / intermediate coat / topcoat in the Jotun range, Baltoflake Ecolife () is selected for steel structures exposed to atmospheric exposure / immersion service.

The substrate for this product is carbon steel / stainless steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Baltoflake Ecolife — key data

ModelBaltoflake Ecolife
Manufacturer product name
Resin systemunsaturated polyester
Componentsthree-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel
Key characteristicshigh-build / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids93 % ± 2 %
Density (specific gravity)1.2 kg/l
Flash point53 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-baltoflake-ecolife.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

Standards and approvals for Baltoflake Ecolife follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Baltoflake Ecolife — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Baltoflake Ecolife, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Baltoflake Ecolife — common questions

Where can I find the technical data for Baltoflake Ecolife?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Baltoflake Ecolife take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Baltoflake Ecolife?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Baltoflake Ecolife

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Baltoflake Ecolife

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat