Offshore steel structures and ship coating (heavy-duty)
Model

Chemflake Special vinyl

Chemflake Special () — in the Jotun range — is a vinyl product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service conditions apply. This model offers high-build / chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Chemflake Special.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Chemflake Special — product overview

A four-component vinyl coating, normally used as primer / intermediate coat / topcoat: key features high-build / chemical-resistant; used in atmospheric exposure / immersion service; suitable on carbon steel / stainless steel / concrete.

Chemflake Special — positioning

Jotun's Chemflake Special is a vinyl primer / intermediate coat / topcoat for atmospheric exposure / immersion service conditions, supplied with its technical documentation.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Where high-build / chemical-resistant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Chemflake Special — key data

ModelChemflake Special
Manufacturer product name
Resin systemvinyl
Componentsfour-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel / concrete
Key characteristicshigh-build / chemical-resistant
Colour rangeRed / White
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids92 % ± 2 %
Density (specific gravity)1.2 kg/l
Flash point34 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-chemflake-special.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel / concrete and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Chemflake Special — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Chemflake Special and the intended use.

Chemflake Special — common questions

Where can I find the technical data for Chemflake Special?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Chemflake Special take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Chemflake Special?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Chemflake Special

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Chemflake Special

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat