Offshore steel structures and ship coating (heavy-duty)
Model

Chemclear vinyl

A vinyl primer in the Jotun range, Chemclear (393) is selected for steel structures exposed to immersion service. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Chemclear.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Chemclear — product overview

Chemclear belongs to the vinyl system and is a two-component product used as primer; service environment immersion service; application and system notes are set out below.

Chemclear — positioning

Chemclear (393) — in the Jotun range — is a vinyl product normally used as primer where immersion service conditions apply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

The model is notable for chemical-resistant.

Service environments include immersion service; send the actual conditions for anything outside that range.

Chemclear — key data

ModelChemclear
Manufacturer product name393
Resin systemvinyl
Componentstwo-component
Typical number of coatsprimer
Service environmentimmersion service
Suitable substratescarbon steel / concrete
Key characteristicschemical-resistant
Colour rangeColourless
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids96 % ± 2 %
Density (specific gravity)1 kg/l
Flash point34 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-chemclear.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature15 °C23 °C40 °C
Walk-on dry4 h2 h1 h
Recoat, minimum4 h2 h1 h

Data taken from the manufacturer's TDS jotun-chemclear.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Chemclear follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Chemclear — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Chemclear and the intended use.

Chemclear — common questions

Which substrates can Chemclear be used on?

The TDS lists the substrate as carbon steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Chemclear?

The service environment for this model is immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Chemclear have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Chemclear

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Chemclear

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat