Penguard Midcoat M20 S modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Midcoat M20 S — product overview
A two-component modified epoxy coating, normally used as intermediate coat: key features fast-drying; used in atmospheric exposure; suitable on steel.
Penguard Midcoat M20 S — positioning
Penguard Midcoat M20 S (6JG) is the modified epoxy intermediate coat in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where fast-drying are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Penguard Midcoat M20 S — key data
| Model | Penguard Midcoat M20 S |
|---|---|
| Manufacturer product name | 6JG |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying |
| Colour range | Light grey / white / RAL 7035 / RAL 9001 / RAL 9010 / RAL 9018 |
| Application method | airless spray / brush |
| Volume solids | 77 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 30 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-midcoat-m20-s.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 8 h | 5 h | 2 h | 1 h |
| Walk-on dry | 24 h | 12 h | 5 h | 2 h |
| Recoat, minimum | 24 h | 12 h | 5 h | 2 h |
| Dried/cured for service | 14 d | 10 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-penguard-midcoat-m20-s.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Penguard Midcoat M20 S — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Midcoat M20 S and the intended use.
Penguard Midcoat M20 S — common questions
Where can I find the technical data for Penguard Midcoat M20 S?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Penguard Midcoat M20 S take in the system?
This model is typically used as intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Penguard Midcoat M20 S?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Penguard Midcoat M20 S
- Balloxy BT
- Balloxy HB Light
- Jotafix Epoxy Primer
- Jotamastic 70
- Jotamastic 80
- Jotamastic 80 Aluminium
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Midcoat M20 S
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net