Jotamastic 80 modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotamastic 80 — product overview
A two-component modified epoxy coating, normally used as primer / intermediate coat / topcoat: key features high solids / surface-tolerant; used in atmospheric exposure / low-temperature application; suitable on carbon steel / coated surfaces.
Jotamastic 80 — positioning
Jotamastic 80 (0AR) is the modified epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply.
Three things decide the system: the substrate (carbon steel / coated surfaces), the service environment (atmospheric exposure / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.
It suits projects where high solids / surface-tolerant matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / low-temperature application conditions.
Jotamastic 80 — key data
| Model | Jotamastic 80 |
|---|---|
| Manufacturer product name | 0AR |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / low-temperature application |
| Suitable substrates | carbon steel / coated surfaces |
| Key characteristics | high solids / surface-tolerant |
| Colour range | Grey / Red / Green / White / Black |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2 / st 2 |
| Volume solids | 80 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 35 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotamastic-80.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / coated surfaces and the corrosivity of the atmospheric exposure / low-temperature application environment.
Standards and approvals
- IMO 2010 FTP
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jotamastic 80 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Jotamastic 80, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jotamastic 80 — common questions
What service environment suits Jotamastic 80?
The service environment for this model is atmospheric exposure / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotamastic 80 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Jotamastic 80?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Jotamastic 80
- Balloxy BT
- Balloxy HB Light
- Jotafix Epoxy Primer
- Jotamastic 80 Aluminium
- Jotamastic 80 MIO
- Jotamastic 87
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotamastic 80
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net