Jotafix Epoxy Primer modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotafix Epoxy Primer — product overview
two-component modified epoxy product for use as primer / intermediate coat / topcoat; surface-tolerant; substrates carbon steel / stainless steel / coated surfaces; service environment atmospheric exposure / low-temperature application.
Jotafix Epoxy Primer — positioning
Jotafix Epoxy Primer is a modified epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / low-temperature application.
Three things decide the system: the substrate (carbon steel / stainless steel / coated surfaces), the service environment (atmospheric exposure / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.
The model is notable for surface-tolerant.
Service environments include atmospheric exposure / low-temperature application; send the actual conditions for anything outside that range.
Jotafix Epoxy Primer — key data
| Model | Jotafix Epoxy Primer |
|---|---|
| Manufacturer product name | 03V |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / low-temperature application |
| Suitable substrates | carbon steel / stainless steel / coated surfaces |
| Key characteristics | surface-tolerant |
| Colour range | Grey / Red |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2 / st 2 |
| Volume solids | 68 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 31 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotafix-epoxy-primer.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -5 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 25 h | 15 h | 8 h | 5 h | 2.5 h | 45 min |
| Walk-on dry | 48 h | 40 h | 20 h | 12 h | 6 h | 2 h |
| Recoat, minimum | 40 h | 30 h | 15 h | 8 h | 4 h | 1.5 h |
Data taken from the manufacturer's TDS jotun-jotafix-epoxy-primer.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel / coated surfaces and the corrosivity of the atmospheric exposure / low-temperature application environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- IMO 2010 FTP
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Jotafix Epoxy Primer follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Jotafix Epoxy Primer — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Jotafix Epoxy Primer, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jotafix Epoxy Primer — common questions
How is the recoat interval for Jotafix Epoxy Primer controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Jotafix Epoxy Primer be used on?
The TDS lists the substrate as carbon steel / stainless steel / coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotafix Epoxy Primer?
The service environment for this model is atmospheric exposure / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Jotafix Epoxy Primer
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotafix Epoxy Primer
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net