Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic 70 modified epoxy

Jotamastic 70 (03U) is the modified epoxy primer / intermediate coat in the Jotun range; this page sets out its system position, parameters and supply. This model offers high solids / surface-tolerant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic 70.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic 70 — product overview

A two-component modified epoxy coating, normally used as primer / intermediate coat: key features high solids / surface-tolerant; used in atmospheric exposure; suitable on carbon steel / coated surfaces.

Jotamastic 70 — positioning

A modified epoxy primer / intermediate coat in the Jotun range, Jotamastic 70 (03U) is selected for steel structures exposed to atmospheric exposure.

The substrate for this product is carbon steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where high solids / surface-tolerant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure conditions.

Jotamastic 70 — key data

ModelJotamastic 70
Manufacturer product name03U
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat
Service environmentatmospheric exposure
Suitable substratescarbon steel / coated surfaces
Key characteristicshigh solids / surface-tolerant
Colour rangeGrey / Red / Aluminium
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / st 2
Volume solids77 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point30 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-70.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-5 °C0 °C5 °C10 °C23 °C40 °C
Touch dry40 h20 h10 h6 h2.5 h1 h
Walk-on dry100 h50 h25 h14 h7 h2.5 h
Recoat, minimum100 h50 h25 h14 h7 h2.5 h
Dried/cured for service42 d21 d14 d10 d7 d3 d

Data taken from the manufacturer's TDS jotun-jotamastic-70.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / coated surfaces and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotamastic 70 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Jotamastic 70, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotamastic 70 — common questions

Which coat does Jotamastic 70 take in the system?

This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Jotamastic 70?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Jotamastic 70?

This model offers high solids / surface-tolerant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

Models related to Jotamastic 70

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic 70

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat