Jotapipe IL 426 phenolic epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotapipe IL 426 — product overview
Jotapipe IL 426 belongs to the phenolic epoxy system and is a two-component product used as single-coat system; service environment atmospheric exposure; application and system notes are set out below.
Jotapipe IL 426 — positioning
Jotapipe IL 426 belongs to the phenolic epoxy family of Jotun protective coatings and is used as single-coat system in atmospheric exposure service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
The model is notable for chemical-resistant.
It is used for protective coating work in atmospheric exposure conditions.
Jotapipe IL 426 — key data
| Model | Jotapipe IL 426 |
|---|---|
| Manufacturer product name | 0WQ |
| Resin system | phenolic epoxy |
| Components | two-component |
| Typical number of coats | single-coat system |
| Service environment | atmospheric exposure |
| Key characteristics | chemical-resistant |
| Colour range | White |
| Application method | airless spray |
| Surface preparation grade | sa 2½ |
| Volume solids | 70 % ± 2 % |
| Density (specific gravity) | 1.57 kg/l |
| Flash point | 28 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotapipe-il-426.pdf) |
Application and system notes
Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 16 h | 4 h | 2 h |
| Dried/cured for service | 14 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-jotapipe-il-426.pdf (page 3); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- ISO 3233
- ISO 3679
- ISO 8501-1
- ISO 8503-2
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotapipe IL 426 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotapipe IL 426 and the intended use.
Jotapipe IL 426 — common questions
How is the recoat interval for Jotapipe IL 426 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Jotapipe IL 426 be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotapipe IL 426?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Jotapipe IL 426
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotapipe IL 426
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net