Baltoflake S2000 unsaturated polyester
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Baltoflake S2000 — product overview
Baltoflake S2000 belongs to the unsaturated polyester system and is a four-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.
Baltoflake S2000 — positioning
A unsaturated polyester primer / intermediate coat / topcoat in the Jotun range, Baltoflake S2000 (276) is selected for steel structures exposed to atmospheric exposure / immersion service.
The substrate for this product is carbon steel / stainless steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where high-build / abrasion-resistant matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / immersion service conditions.
Baltoflake S2000 — key data
| Model | Baltoflake S2000 |
|---|---|
| Manufacturer product name | 276 |
| Resin system | unsaturated polyester |
| Components | four-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / stainless steel |
| Key characteristics | high-build / abrasion-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 96 % ± 2 % |
| Density (specific gravity) | 1.7 kg/l |
| Flash point | 34 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-baltoflake-s2000.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 3 h | 2 h | 2 h |
| Walk-on dry | 5 h | 2 h | 2 h |
| Recoat, minimum | 5 h | 2 h | 2 h |
| Dried/cured for service | 4 d | 2 d | 1 d |
Data taken from the manufacturer's TDS jotun-baltoflake-s2000.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / stainless steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- ISO 2813
- ISO 3679
- ISO 8501-1
- ISO 8503-2
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Baltoflake S2000 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Baltoflake S2000 and the intended use.
Baltoflake S2000 — common questions
How is the recoat interval for Baltoflake S2000 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Baltoflake S2000 be used on?
The TDS lists the substrate as carbon steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Baltoflake S2000?
The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Baltoflake S2000
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Baltoflake S2000
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net