Offshore steel structures and ship coating (heavy-duty)
Model

Jota ZEP WF zinc-containing epoxy

Jota ZEP WF belongs to the zinc-containing epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure service. For the complete technical data, request the manufacturer's TDS and SDS for Jota ZEP WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jota ZEP WF — product overview

This is a two-component zinc-containing epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of steel.

Jota ZEP WF — positioning

Jota ZEP WF () — in the Jotun range — is a zinc-containing epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure conditions apply.

Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: atmospheric exposure.

Jota ZEP WF — key data

ModelJota ZEP WF
Manufacturer product name
Resin systemzinc-containing epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure
Colour rangeGrey
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2
Volume solids48 % ± 2 %
Density (specific gravity)1.74 kg/l
Flash point38 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jota-zep-wf.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry2 h45 min15 min
Walk-on dry18 h6 h2 h
Recoat, minimum18 h6 h2 h
Dried/cured for service30 d14 d5 d

Data taken from the manufacturer's TDS jotun-jota-zep-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Jota ZEP WF — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jota ZEP WF and the intended use.

Jota ZEP WF — common questions

How many components does Jota ZEP WF have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Jota ZEP WF?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jota ZEP WF take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Jota ZEP WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jota ZEP WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat