Jota ZEP WF zinc-containing epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jota ZEP WF — product overview
This is a two-component zinc-containing epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of steel.
Jota ZEP WF — positioning
Jota ZEP WF () — in the Jotun range — is a zinc-containing epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure conditions apply.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure.
Jota ZEP WF — key data
| Model | Jota ZEP WF |
|---|---|
| Manufacturer product name | |
| Resin system | zinc-containing epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure |
| Colour range | Grey |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 |
| Volume solids | 48 % ± 2 % |
| Density (specific gravity) | 1.74 kg/l |
| Flash point | 38 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jota-zep-wf.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 2 h | 45 min | 15 min |
| Walk-on dry | 18 h | 6 h | 2 h |
| Recoat, minimum | 18 h | 6 h | 2 h |
| Dried/cured for service | 30 d | 14 d | 5 d |
Data taken from the manufacturer's TDS jotun-jota-zep-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- ASTM D520
- GB 30981-2020
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jota ZEP WF — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jota ZEP WF and the intended use.
Jota ZEP WF — common questions
How many components does Jota ZEP WF have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Jota ZEP WF?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Jota ZEP WF take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Jota ZEP WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jota ZEP WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net