Baltoflake FC unsaturated polyester
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Baltoflake FC — product overview
Baltoflake FC belongs to the unsaturated polyester system and is a three-component product used as topcoat; service environment atmospheric exposure; application and system notes are set out below.
Baltoflake FC — positioning
Baltoflake FC (0R6) — in the Jotun range — is a unsaturated polyester product normally used as topcoat where atmospheric exposure conditions apply.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
It suits projects where high-build / abrasion-resistant matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure conditions.
Baltoflake FC — key data
| Model | Baltoflake FC |
|---|---|
| Manufacturer product name | 0R6 |
| Resin system | unsaturated polyester |
| Components | three-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / stainless steel / aluminium |
| Key characteristics | high-build / abrasion-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray |
| Surface preparation grade | sa 2½ |
| Volume solids | 96 % ± 2 % |
| Density (specific gravity) | 1.2 kg/l |
| Flash point | 34 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-baltoflake-fc.pdf) |
Application and system notes
Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 23 °C | 40 °C |
|---|---|---|
| Touch dry | 2 h | 2 h |
| Walk-on dry | 2 h | 2 h |
| Dried/cured for service | 2 d | 1 d |
Data taken from the manufacturer's TDS jotun-baltoflake-fc.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / stainless steel / aluminium / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 38508-2020
- ISO 2813
- ISO 3679
- ISO 8501-1
- ISO 8503-2
Standards and approvals for Baltoflake FC follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Baltoflake FC — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
For the full technical data on Baltoflake FC, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Baltoflake FC — common questions
Which substrates can Baltoflake FC be used on?
The TDS lists the substrate as carbon steel / stainless steel / aluminium; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Baltoflake FC?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Baltoflake FC have, and how is it mixed?
This model is a three-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Baltoflake FC
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Baltoflake FC
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net