Resist ZES inorganic zinc silicate
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Resist ZES — product overview
A two-component inorganic zinc silicate coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel.
Resist ZES — positioning
Jotun's Resist ZES is a inorganic zinc silicate primer for atmospheric exposure conditions, supplied with its technical documentation.
Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: atmospheric exposure.
Resist ZES — key data
| Model | Resist ZES |
|---|---|
| Manufacturer product name | 0F3 |
| Resin system | inorganic zinc silicate |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Colour range | Grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 69 % ± 2 % |
| Density (specific gravity) | 2.1 kg/l |
| Flash point | 16 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-resist-zes.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 1 h | 30 min | 15 min | 10 min |
| Walk-on dry | 2 h | 1 h | 30 min | 20 min |
| Recoat, minimum | 84 h | 42 h | 18 h | 10 h |
| Dried/cured for service | 84 h | 42 h | 18 h | 10 h |
Data taken from the manufacturer's TDS jotun-resist-zes.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- ASTM D520
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3679
- ISO 8501-1
- ISO 8503-2
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Resist ZES — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Resist ZES, send a request at the foot of this page, or contact us on WhatsApp or by email.
Resist ZES — common questions
How many components does Resist ZES have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Resist ZES?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Resist ZES take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Resist ZES
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Resist ZES
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net