Resist 65 inorganic zinc silicate
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Resist 65 — product overview
A two-component inorganic zinc silicate coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel.
Resist 65 — positioning
Resist 65 (0D8) — in the Jotun range — is a inorganic zinc silicate product normally used as primer where atmospheric exposure conditions apply.
The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: atmospheric exposure.
Resist 65 — key data
| Model | Resist 65 |
|---|---|
| Manufacturer product name | 0D8 |
| Resin system | inorganic zinc silicate |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Colour range | Grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 72 % ± 2 % |
| Density (specific gravity) | 2.4 kg/l |
| Flash point | 16 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-resist-65.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 1 h | 30 min | 15 min | 10 min |
| Walk-on dry | 2 h | 1 h | 30 min | 20 min |
| Recoat, minimum | 84 h | 42 h | 18 h | 10 h |
| Dried/cured for service | 84 h | 42 h | 18 h | 10 h |
Data taken from the manufacturer's TDS jotun-resist-65.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- ASTM D520
- GB 30981-2020
- GB 38508-2020
- ISO 2813
- ISO 3679
- ISO 8501-1
- ISO 8503-2
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Resist 65 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Resist 65 and the intended use.
Resist 65 — common questions
What service environment suits Resist 65?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Resist 65 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Resist 65?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Resist 65
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Resist 65
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net