Offshore steel structures and ship coating (heavy-duty)
Model

Resist 86 inorganic zinc silicate

Resist 86 (0KH) is the inorganic zinc silicate primer in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for Resist 86.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Resist 86 — product overview

This is a two-component inorganic zinc silicate product, typically used as primer. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of carbon steel.

Resist 86 — positioning

A inorganic zinc silicate primer in the Jotun range, Resist 86 (0KH) is selected for steel structures exposed to atmospheric exposure.

Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: atmospheric exposure.

Resist 86 — key data

ModelResist 86
Manufacturer product name0KH
Resin systeminorganic zinc silicate
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel
Colour rangeGrey green / grey
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids67 % ± 2 %
Density (specific gravity)2.6 kg/l
Flash point14 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-resist-86.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry1 h30 min15 min13 min
Walk-on dry1.5 h45 min30 min25 min
Recoat, minimum18 h13 h4 h1.5 h
Dried/cured for service18 h13 h4 h1.5 h

Data taken from the manufacturer's TDS jotun-resist-86.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Resist 86 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Resist 86 and the intended use.

Resist 86 — common questions

How is the recoat interval for Resist 86 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Resist 86 be used on?

The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Resist 86?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Resist 86

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Resist 86

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat