Resist 78 inorganic zinc silicate
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Resist 78 — product overview
A two-component inorganic zinc silicate coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel.
Resist 78 — positioning
Resist 78 is a inorganic zinc silicate primer from the Jotun range, formulated for steel structures in atmospheric exposure.
Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Resist 78 — key data
| Model | Resist 78 |
|---|---|
| Manufacturer product name | 0JR |
| Resin system | inorganic zinc silicate |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Colour range | Grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 72 % ± 2 % |
| Density (specific gravity) | 2.5 kg/l |
| Flash point | 14 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-resist-78.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Walk-on dry | 1.5 h | 45 min | 30 min | 25 min |
| Recoat, minimum | 18 h | 13 h | 4 h | 1.5 h |
| Dried/cured for service | 18 h | 13 h | 4 h | 1.5 h |
Data taken from the manufacturer's TDS jotun-resist-78.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- ASTM D520
- GB 30981.2
- GB 30981.2-2025
- ISO 12944-2
- ISO 12944-5
- ISO 2813
- ISO 3679
- ISO 8501-1
Standards and approvals for Resist 78 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Resist 78 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Resist 78, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Resist 78 — common questions
How is the recoat interval for Resist 78 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Resist 78 be used on?
The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Resist 78?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Resist 78
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Resist 78
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net