Penguard WF auxiliary material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard WF — product overview
A one-component auxiliary material coating, normally used as inhibitor: key features fast-drying; used in as the system requires; suitable on carbon steel / galvanised steel / concrete.
Penguard WF — positioning
Penguard WF is a auxiliary material inhibitor from the Jotun range, formulated for steel structures in as the system requires.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where fast-drying are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in as the system requires conditions.
Penguard WF — key data
| Model | Penguard WF |
|---|---|
| Manufacturer product name | 0N7 |
| Resin system | auxiliary material |
| Components | one-component |
| Typical number of coats | inhibitor |
| Service environment | as the system requires |
| Suitable substrates | carbon steel / galvanised steel / concrete |
| Key characteristics | fast-drying |
| Colour range | As the system requires |
| Application method | add to the companion coating |
| Surface preparation grade | sa 2½ / st 2 |
| Volume solids | 51 % ± 2 % |
| Density (specific gravity) | 1.3 kg/l |
| Flash point | 62 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-wf.pdf) |
Application and system notes
Application: add to the companion coating (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.
For verification, the original manufacturer's TDS for this model can be requested.
Usually applied as inhibitor; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / concrete and the corrosivity of the as the system requires environment.
Standards and approvals
- EN 15804
- GB 30981-2020
- GB 38508-2020
- ISO 11890
- ISO 14025
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Penguard WF — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Penguard WF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Penguard WF — common questions
What service environment suits Penguard WF?
The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Penguard WF have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Penguard WF?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Penguard WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net