Accelerator DMA10 auxiliary material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Accelerator DMA10 — product overview
A one-component auxiliary material coating, normally used as accelerator: key features manufactured to the manufacturer's technical data sheet; used in as the system requires; suitable on steel.
Accelerator DMA10 — positioning
Jotun's Accelerator DMA10 is a auxiliary material accelerator for as the system requires conditions, supplied with its technical documentation.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Service environments include as the system requires; send the actual conditions for anything outside that range.
Accelerator DMA10 — key data
| Model | Accelerator DMA10 |
|---|---|
| Manufacturer product name | 0K3 |
| Resin system | auxiliary material |
| Components | one-component |
| Typical number of coats | accelerator |
| Service environment | as the system requires |
| Colour range | As the system requires |
| Application method | add to the companion coating |
| Density (specific gravity) | 0.9 kg/l |
| Flash point | 34 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-accelerator-dma10.pdf) |
Application and system notes
Application: add to the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.
For verification, the original manufacturer's TDS for this model can be requested.
Usually applied as accelerator; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the as the system requires environment.
Standards and approvals
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Accelerator DMA10 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Accelerator DMA10 and the intended use.
Accelerator DMA10 — common questions
How many components does Accelerator DMA10 have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Accelerator DMA10?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Accelerator DMA10 take in the system?
This model is typically used as accelerator. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Accelerator DMA10
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Accelerator DMA10
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net