Offshore steel structures and ship coating (heavy-duty)
Model

Muki Z 1000 WF inorganic zinc silicate

Muki Z 1000 WF belongs to the inorganic zinc silicate family of Jotun protective coatings and is used as primer in atmospheric exposure service. This model offers fast-drying / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Muki Z 1000 WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Muki Z 1000 WF — product overview

two-component inorganic zinc silicate product for use as primer; fast-drying / abrasion-resistant; substrates carbon steel; service environment atmospheric exposure.

Muki Z 1000 WF — positioning

Muki Z 1000 WF is a inorganic zinc silicate primer from the Jotun range, formulated for steel structures in atmospheric exposure.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Where fast-drying / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Muki Z 1000 WF — key data

ModelMuki Z 1000 WF
Manufacturer product name6AA
Resin systeminorganic zinc silicate
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel
Key characteristicsfast-drying / abrasion-resistant
Colour rangeGrey / Green / Red / Blue
Application methodairless spray
Surface preparation gradesa 2½
Volume solids62 % ± 2 %
Density (specific gravity)2.6 kg/l
Flash point120 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-muki-z-1000-wf.pdf)

Application and system notes

Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature23 °C40 °C
Walk-on dry3 min2 min
Recoat, minimum1 d1 d
Dried/cured for service1 d1 d

Data taken from the manufacturer's TDS jotun-muki-z-1000-wf.pdf (page 3); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Muki Z 1000 WF — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Muki Z 1000 WF and the intended use.

Muki Z 1000 WF — common questions

How many components does Muki Z 1000 WF have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Muki Z 1000 WF?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Muki Z 1000 WF take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Muki Z 1000 WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Muki Z 1000 WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat