Jotaguard 690 S epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotaguard 690 S — product overview
This is a two-component epoxy product, typically used as topcoat. It is characterised by fast-drying / high solids / high-build / abrasion-resistant; service environment atmospheric exposure / immersion service / low-temperature application; suitable for protective coating of steel.
Jotaguard 690 S — positioning
Jotaguard 690 S belongs to the epoxy family of Jotun protective coatings and is used as topcoat in atmospheric exposure / immersion service / low-temperature application service.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure / immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.
It suits projects where fast-drying / high solids / high-build / abrasion-resistant matters — tight application windows or demanding maintenance regimes.
Service environments include atmospheric exposure / immersion service / low-temperature application; send the actual conditions for anything outside that range.
Jotaguard 690 S — key data
| Model | Jotaguard 690 S |
|---|---|
| Manufacturer product name | 0S3 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure / immersion service / low-temperature application |
| Key characteristics | fast-drying / high solids / high-build / abrasion-resistant |
| Colour range | Grey / Red / Light yellow |
| Application method | airless spray / brush / roller |
| Volume solids | 75 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 33 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotaguard-690-s.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- FDA Title 21, Part 175.300,
- FDA
- GB 30981-2020
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotaguard 690 S — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
For the full technical data on Jotaguard 690 S, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jotaguard 690 S — common questions
Which coat does Jotaguard 690 S take in the system?
This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Jotaguard 690 S?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Jotaguard 690 S?
This model offers fast-drying / high solids / high-build / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Jotaguard 690 S
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Jotaguard 630
- Jotaguard 660
- Penguard EXA II
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotaguard 690 S
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net