Penguard EXA II epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard EXA II — product overview
A two-component epoxy coating, normally used as primer / intermediate coat / topcoat: key features fast-drying / high solids / high-build / abrasion-resistant; used in atmospheric exposure / immersion service / low-temperature application; suitable on carbon steel / galvanised steel / stainless steel / coated surfaces.
Penguard EXA II — positioning
Penguard EXA II is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service / low-temperature application service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where fast-drying / high solids / high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.
Penguard EXA II — key data
| Model | Penguard EXA II |
|---|---|
| Manufacturer product name | 02D |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service / low-temperature application |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / coated surfaces |
| Key characteristics | fast-drying / high solids / high-build / abrasion-resistant |
| Colour range | Aluminium red / Grey / White / Black |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 75 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 35 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-exa-ii.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | -5 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|---|
| Touch dry | 26 h | 14 h | 10 h | 6 h | 5 h | 2 h | 1 h |
| Walk-on dry | 96 h | 48 h | 30 h | 16 h | 10 h | 5 h | 2 h |
| Recoat, minimum | 42 h | 24 h | 18 h | 10 h | 7 h | 4 h | 2 h |
Data taken from the manufacturer's TDS jotun-penguard-exa-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel / coated surfaces and the corrosivity of the atmospheric exposure / immersion service / low-temperature application environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- IMO 2010 FTP
- IMO Res.215(82)
- IMO Res.288(87)
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Penguard EXA II — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Penguard EXA II, send a request at the foot of this page, or contact us on WhatsApp or by email.
Penguard EXA II — common questions
What are the minimum order quantity and lead time for Penguard EXA II?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Penguard EXA II?
This model offers fast-drying / high solids / high-build / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Penguard EXA II controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Models related to Penguard EXA II
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Penguard Shield GF
- Penguard Universal
- Jotacote B10
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard EXA II
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net