Jotacote B10 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotacote B10 — product overview
two-component epoxy product for use as primer / intermediate coat / topcoat; fast-drying / high-build / abrasion-resistant; substrates carbon steel / galvanised steel; service environment immersion service / low-temperature application.
Jotacote B10 — positioning
Jotacote B10 is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for immersion service / low-temperature application service.
Three things decide the system: the substrate (carbon steel / galvanised steel), the service environment (immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.
Where fast-drying / high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
Service environments include immersion service / low-temperature application; send the actual conditions for anything outside that range.
Jotacote B10 — key data
| Model | Jotacote B10 |
|---|---|
| Manufacturer product name | 0AY |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | immersion service / low-temperature application |
| Suitable substrates | carbon steel / galvanised steel |
| Key characteristics | fast-drying / high-build / abrasion-resistant |
| Colour range | Aluminium red / Grey |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 72 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 32 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotacote-b10.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981-2020
- IMO Res.215(82)
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- PSPC
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotacote B10 — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Jotacote B10, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotacote B10 — common questions
How is the recoat interval for Jotacote B10 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Jotacote B10 be used on?
The TDS lists the substrate as carbon steel / galvanised steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotacote B10?
The service environment for this model is immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Jotacote B10
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Penguard EXA II
- Penguard Shield GF
- Penguard Universal
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotacote B10
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net