Offshore steel structures and ship coating (heavy-duty)
Model

Jotaguard 660 epoxy

Jotaguard 660 (0S4) is the epoxy primer / topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers fast-drying / high solids / high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotaguard 660.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotaguard 660 — product overview

This is a two-component epoxy product, typically used as primer / topcoat. It is characterised by fast-drying / high solids / high-build / surface-tolerant / abrasion-resistant; service environment atmospheric exposure / immersion service / low-temperature application; suitable for protective coating of carbon steel.

Jotaguard 660 — positioning

A epoxy primer / topcoat in the Jotun range, Jotaguard 660 (0S4) is selected for steel structures exposed to atmospheric exposure / immersion service / low-temperature application.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

It suits projects where fast-drying / high solids / high-build / surface-tolerant / abrasion-resistant matters — tight application windows or demanding maintenance regimes.

Service environments include atmospheric exposure / immersion service / low-temperature application; send the actual conditions for anything outside that range.

Jotaguard 660 — key data

ModelJotaguard 660
Manufacturer product name0S4
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel
Key characteristicsfast-drying / high solids / high-build / surface-tolerant / abrasion-resistant
Colour rangeGrey / Red / Light yellow
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids72 % ± 2 %
Density (specific gravity)1.37 kg/l
Flash point31 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotaguard-660.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Usually applied as primer / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure / immersion service / low-temperature application environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotaguard 660 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotaguard 660 and the intended use.

Jotaguard 660 — common questions

Which substrates can Jotaguard 660 be used on?

The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Jotaguard 660?

The service environment for this model is atmospheric exposure / immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Jotaguard 660 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Jotaguard 660

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotaguard 660

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat