Jotacote Universal epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotacote Universal — product overview
A two-component epoxy coating, normally used as primer / intermediate coat / topcoat: key features fast-drying / high-build / abrasion-resistant; used in atmospheric exposure / immersion service / low-temperature application; suitable on carbon steel / galvanised steel / stainless steel / concrete.
Jotacote Universal — positioning
Jotacote Universal belongs to the epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service / low-temperature application service.
The substrate for this product is carbon steel / galvanised steel / stainless steel / concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where fast-drying / high-build / abrasion-resistant matters — tight application windows or demanding maintenance regimes.
Typical service environment: atmospheric exposure / immersion service / low-temperature application.
Jotacote Universal — key data
| Model | Jotacote Universal |
|---|---|
| Manufacturer product name | 0CL |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service / low-temperature application |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete |
| Key characteristics | fast-drying / high-build / abrasion-resistant |
| Colour range | Aluminium red / Aluminium / Light yellow / Grey |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 72 % ± 2 % |
| Density (specific gravity) | 1.3 kg/l |
| Flash point | 35 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotacote-universal.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | -5 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|---|
| Touch dry | 36 h | 20 h | 14 h | 8 h | 5 h | 2.5 h | 1 h |
| Walk-on dry | 4 d | 48 h | 30 h | 16 h | 10 h | 5 h | 2 h |
| Recoat, minimum | 42 h | 24 h | 18 h | 10 h | 7 h | 4 h | 2 h |
Data taken from the manufacturer's TDS jotun-jotacote-universal.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / concrete / atmospheric exposure / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- IMO 2010 FTP
- IMO Res.215(82)
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jotacote Universal — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotacote Universal and the intended use.
Jotacote Universal — common questions
Where can I find the technical data for Jotacote Universal?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Jotacote Universal take in the system?
This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Jotacote Universal?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Jotacote Universal
- Jotacote HF002
- Jotacote Universal HF002
- Penguard EXA II
- Penguard Shield GF
- Penguard Universal
- Jotacote B10
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotacote Universal
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net