Hardtop Pro polysiloxane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop Pro — product overview
This is a two-component polysiloxane product, typically used as topcoat. It is characterised by high solids / chemical-resistant; service environment atmospheric exposure; suitable for protective coating of steel.
Hardtop Pro — positioning
Hardtop Pro belongs to the polysiloxane family of Jotun protective coatings and is used as topcoat in atmospheric exposure service.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
The model is notable for high solids / chemical-resistant.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Hardtop Pro — key data
| Model | Hardtop Pro |
|---|---|
| Manufacturer product name | 0U5 |
| Resin system | polysiloxane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids / chemical-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Volume solids | 65 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 28 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-pro.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 15 h | 10 h | 7 h | 5 h | 3 h |
| Walk-on dry | 32 h | 25 h | 20 h | 8 h | 4 h |
| Recoat, minimum | 32 h | 25 h | 20 h | 8 h | 4 h |
| Dried/cured for service | 20 d | 15 d | 10 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-pro.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
- Norsok M-501
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Hardtop Pro — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Hardtop Pro and the intended use.
Hardtop Pro — common questions
Which substrates can Hardtop Pro be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Hardtop Pro?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Hardtop Pro have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Hardtop Pro
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop Pro
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net