Hardtop Optima Alu polysiloxane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop Optima Alu — product overview
This is a two-component polysiloxane product, typically used as topcoat. It is characterised by high solids / high-build; service environment atmospheric exposure; suitable for protective coating of steel.
Hardtop Optima Alu — positioning
Hardtop Optima Alu is a polysiloxane topcoat from the Jotun range, formulated for steel structures in atmospheric exposure.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where high solids / high-build are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Hardtop Optima Alu — key data
| Model | Hardtop Optima Alu |
|---|---|
| Manufacturer product name | 0LZ |
| Resin system | polysiloxane |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids / high-build |
| Colour range | RAL 9006 |
| Application method | airless spray |
| Volume solids | 74 % ± 2 % |
| Density (specific gravity) | 1.2 kg/l |
| Flash point | 28 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-optima-alu.pdf) |
Application and system notes
Application: airless spray. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 10 h | 5 h | 3 h | 2 h |
| Walk-on dry | 12 h | 7 h | 4 h | 3 h |
| Recoat, minimum | 12 h | 7 h | 4 h | 3 h |
| Dried/cured for service | 15 d | 10 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-hardtop-optima-alu.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- ISO 2813
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Hardtop Optima Alu — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Hardtop Optima Alu, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Hardtop Optima Alu — common questions
How many components does Hardtop Optima Alu have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Hardtop Optima Alu?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Hardtop Optima Alu take in the system?
This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Hardtop Optima Alu
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop Optima Alu
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net