Offshore steel structures and ship coating (heavy-duty)
Model

Thinner NO 3 auxiliary material

Jotun's Thinner NO 3 is a auxiliary material thinner for as the system requires conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for Thinner NO 3.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Thinner NO 3 — product overview

This is a one-component auxiliary material product, typically used as thinner. It is characterised by manufactured to the manufacturer's technical data sheet; service environment as the system requires; suitable for protective coating of steel.

Thinner NO 3 — positioning

Thinner NO 3 () is the auxiliary material thinner in the Jotun range; this page sets out its system position, parameters and supply.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: as the system requires.

Thinner NO 3 — key data

ModelThinner NO 3
Manufacturer product name
Resin systemauxiliary material
Componentsone-component
Typical number of coatsthinner
Service environmentas the system requires
Colour rangeColourless
Application methodthin the companion coating
Density (specific gravity)0.8 kg/l
Flash point8 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-thinner-no-3.pdf)

Application and system notes

Application: thin the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.

For verification, the original manufacturer's TDS for this model can be requested.

Usually applied as thinner; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the as the system requires environment.

Standards and approvals

Standards and approvals for Thinner NO 3 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Thinner NO 3 — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Thinner NO 3 and the intended use.

Thinner NO 3 — common questions

How many components does Thinner NO 3 have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Thinner NO 3?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Thinner NO 3 take in the system?

This model is typically used as thinner. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Thinner NO 3

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Thinner NO 3

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat