Offshore steel structures and ship coating (heavy-duty)
Model

Jotun Thinner No. 11 auxiliary material

Jotun Thinner No. 11 (092) is the auxiliary material thinner in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for Jotun Thinner No. 11.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotun Thinner No. 11 — product overview

one-component auxiliary material product for use as thinner; manufactured to the manufacturer's technical data sheet; substrates steel; service environment as the system requires.

Jotun Thinner No. 11 — positioning

Jotun's Jotun Thinner No. 11 is a auxiliary material thinner for as the system requires conditions, supplied with its technical documentation.

Three things decide the system: the substrate (steel), the service environment (as the system requires) and the design life. Together they set the number of coats and the total film thickness.

This model is manufactured to the manufacturer's technical data sheet.

Typical service environment: as the system requires.

Jotun Thinner No. 11 — key data

ModelJotun Thinner No. 11
Manufacturer product name092
Resin systemauxiliary material
Componentsone-component
Typical number of coatsthinner
Service environmentas the system requires
Colour rangeColourless
Application methodthin the companion coating
Density (specific gravity)0.8 kg/l
Flash point10 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-thinner-no-11.pdf)

Application and system notes

Application: thin the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.

For verification, the original manufacturer's TDS for this model can be requested.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotun Thinner No. 11 — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotun Thinner No. 11 and the intended use.

Jotun Thinner No. 11 — common questions

Which substrates can Jotun Thinner No. 11 be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Jotun Thinner No. 11?

The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Jotun Thinner No. 11 have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Jotun Thinner No. 11

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotun Thinner No. 11

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat