Thinner NO 25 auxiliary material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Thinner NO 25 — product overview
one-component auxiliary material product for use as thinner; manufactured to the manufacturer's technical data sheet; substrates steel; service environment as the system requires.
Thinner NO 25 — positioning
A auxiliary material thinner in the Jotun range, Thinner NO 25 () is selected for steel structures exposed to as the system requires.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: as the system requires.
Thinner NO 25 — key data
| Model | Thinner NO 25 |
|---|---|
| Manufacturer product name | |
| Resin system | auxiliary material |
| Components | one-component |
| Typical number of coats | thinner |
| Service environment | as the system requires |
| Colour range | Colourless |
| Application method | thin the companion coating |
| Density (specific gravity) | 0.9 kg/l |
| Flash point | 30 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-thinner-no-25.pdf) |
Application and system notes
Application: thin the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.
For verification, the original manufacturer's TDS for this model can be requested.
Usually applied as thinner; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the as the system requires environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Thinner NO 25 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Thinner NO 25 and the intended use.
Thinner NO 25 — common questions
Where can I find the technical data for Thinner NO 25?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Thinner NO 25 take in the system?
This model is typically used as thinner. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Thinner NO 25?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Thinner NO 25
- Jotun Thinner No. 10
- Jotun Thinner No. 11
- Jotun Thinner No. 12
- Jotun Thinner No. 16
- Jotun Thinner No. 18
- Jotun Thinner No. 19
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Thinner NO 25
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net