Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard Zinc inorganic zinc silicate

Tankguard Zinc (0SX) — in the Jotun range — is a inorganic zinc silicate product normally used as lining where atmospheric exposure / immersion service conditions apply. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard Zinc.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard Zinc — product overview

two-component inorganic zinc silicate product for use as lining; manufactured to the manufacturer's technical data sheet; substrates carbon steel; service environment atmospheric exposure / immersion service.

Tankguard Zinc — positioning

A inorganic zinc silicate lining in the Jotun range, Tankguard Zinc (0SX) is selected for steel structures exposed to atmospheric exposure / immersion service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Tankguard Zinc — key data

ModelTankguard Zinc
Manufacturer product name0SX
Resin systeminorganic zinc silicate
Componentstwo-component
Typical number of coatslining
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel
Colour rangeGrey
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids67 % ± 2 %
Density (specific gravity)2.6 kg/l
Flash point16 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-zinc.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C15 °C23 °C30 °C40 °C
Touch dry1 h45 min45 min30 min27 min20 min
Walk-on dry1.5 h1 h1 h45 min35 min30 min
Dried/cured for service8 d6 d96 h48 h34 h18 h

Data taken from the manufacturer's TDS jotun-tankguard-zinc.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as lining; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Tankguard Zinc — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Tankguard Zinc, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Tankguard Zinc — common questions

What service environment suits Tankguard Zinc?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Tankguard Zinc have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Tankguard Zinc?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Tankguard Zinc

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard Zinc

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat