Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard Special Ultra epoxy

Tankguard Special Ultra (0GW) — in the Jotun range — is a epoxy product normally used as topcoat where immersion service conditions apply. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard Special Ultra.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard Special Ultra — product overview

This is a two-component epoxy product, typically used as topcoat. It is characterised by chemical-resistant; service environment immersion service; suitable for protective coating of carbon steel / galvanised steel / stainless steel.

Tankguard Special Ultra — positioning

Jotun's Tankguard Special Ultra is a epoxy topcoat for immersion service conditions, supplied with its technical documentation.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where chemical-resistant matters — tight application windows or demanding maintenance regimes.

Typical service environment: immersion service.

Tankguard Special Ultra — key data

ModelTankguard Special Ultra
Manufacturer product name0GW
Resin systemepoxy
Componentstwo-component
Typical number of coatstopcoat
Service environmentimmersion service
Suitable substratescarbon steel / galvanised steel / stainless steel
Key characteristicschemical-resistant
Colour rangelight red / Yellow / Light grey
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids70 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point28 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-special-ultra.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C15 °C23 °C30 °C40 °C
Touch dry24 h16 h6 h4 h3 h2 h
Walk-on dry36 h24 h10 h7 h4 h3 h
Recoat, minimum36 h24 h20 h16 h14 h10 h

Data taken from the manufacturer's TDS jotun-tankguard-special-ultra.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Tankguard Special Ultra follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Tankguard Special Ultra — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Tankguard Special Ultra and the intended use.

Tankguard Special Ultra — common questions

What are the key characteristics of Tankguard Special Ultra?

This model offers chemical-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Tankguard Special Ultra controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Tankguard Special Ultra be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Tankguard Special Ultra

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard Special Ultra

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat