Offshore steel structures and ship coating (heavy-duty)
Model

Solvalitt 300 Alu silicone acrylic

Solvalitt 300 Alu is the silicone acrylic primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure service. For the complete technical data, request the manufacturer's TDS and SDS for Solvalitt 300 Alu.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Solvalitt 300 Alu — product overview

This is a one-component silicone acrylic product, typically used as primer / intermediate coat / topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of carbon steel / galvanised steel / stainless steel.

Solvalitt 300 Alu — positioning

Solvalitt 300 Alu (7A7) is the silicone acrylic primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply.

Three things decide the system: the substrate (carbon steel / galvanised steel / stainless steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Solvalitt 300 Alu — key data

ModelSolvalitt 300 Alu
Manufacturer product name7A7
Resin systemsilicone acrylic
Componentsone-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel / stainless steel
Colour rangeAluminium
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids44 % ± 2 %
Density (specific gravity)1.16 kg/l
Flash point28 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-solvalitt-300-alu.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry45 min30 min15 min10 min
Walk-on dry4 h3 h2 h1 h
Recoat, minimum6 h3 h2 h1 h

Data taken from the manufacturer's TDS jotun-solvalitt-300-alu.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Solvalitt 300 Alu — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Solvalitt 300 Alu, send a request at the foot of this page, or contact us on WhatsApp or by email.

Solvalitt 300 Alu — common questions

How is the recoat interval for Solvalitt 300 Alu controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Solvalitt 300 Alu be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Solvalitt 300 Alu?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Solvalitt 300 Alu

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Solvalitt 300 Alu

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat