Offshore steel structures and ship coating (heavy-duty)
Model

SeaQuest Endura II industrial coating

SeaQuest Endura II () is the industrial coating topcoat / antifouling in the Jotun range; this page sets out its system position, parameters and supply. For the complete technical data, request the manufacturer's TDS and SDS for SeaQuest Endura II.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaQuest Endura II — product overview

SeaQuest Endura II belongs to the industrial coating system and is a three-component product used as topcoat / antifouling; service environment immersion service; application and system notes are set out below.

SeaQuest Endura II — positioning

SeaQuest Endura II () is the industrial coating topcoat / antifouling in the Jotun range; this page sets out its system position, parameters and supply.

The substrate for this product is coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

This model is manufactured to the manufacturer's technical data sheet.

Service environments include immersion service; send the actual conditions for anything outside that range.

SeaQuest Endura II — key data

ModelSeaQuest Endura II
Manufacturer product name
Resin systemindustrial coating
Componentsthree-component
Typical number of coatstopcoat / antifouling
Service environmentimmersion service
Suitable substratescoated surfaces
Colour rangeRed / Black
Application methodairless spray / brush / roller
Volume solids75 % ± 2 %
Density (specific gravity)1 kg/l
Flash point33 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seaquest-endura-ii.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C30 °C40 °C
Touch dry7 h6 h5 h4 h3 h

Data taken from the manufacturer's TDS jotun-seaquest-endura-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (coated surfaces / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

SeaQuest Endura II — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on SeaQuest Endura II, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

SeaQuest Endura II — common questions

What are the key characteristics of SeaQuest Endura II?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for SeaQuest Endura II controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can SeaQuest Endura II be used on?

The TDS lists the substrate as coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to SeaQuest Endura II

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaQuest Endura II

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat