Offshore steel structures and ship coating (heavy-duty)
Model

SeaForce Active Ace industrial coating

Jotun's SeaForce Active Ace is a industrial coating antifouling for immersion service conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for SeaForce Active Ace.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaForce Active Ace — product overview

SeaForce Active Ace belongs to the industrial coating system and is a one-component product used as antifouling; service environment immersion service; application and system notes are set out below.

SeaForce Active Ace — positioning

SeaForce Active Ace belongs to the industrial coating family of Jotun protective coatings and is used as antifouling in immersion service service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

This model is manufactured to the manufacturer's technical data sheet.

It is used for protective coating work in immersion service conditions.

SeaForce Active Ace — key data

ModelSeaForce Active Ace
Manufacturer product name6HG
Resin systemindustrial coating
Componentsone-component
Typical number of coatsantifouling
Service environmentimmersion service
Colour rangeDark red / light red
Application methodairless spray / brush / roller
Volume solids58 % ± 2 %
Density (specific gravity)1.7 kg/l
Flash point28 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seaforce-active-ace.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C10 °C23 °C40 °C
Touch dry5 h2 h45 min30 min30 min
Recoat, minimum48 h36 h9 h7 h6 h

Data taken from the manufacturer's TDS jotun-seaforce-active-ace.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

SeaForce Active Ace — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for SeaForce Active Ace, send a request at the foot of this page, or contact us on WhatsApp or by email.

SeaForce Active Ace — common questions

How is the recoat interval for SeaForce Active Ace controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can SeaForce Active Ace be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits SeaForce Active Ace?

The service environment for this model is immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to SeaForce Active Ace

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaForce Active Ace

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat