Se-lett alkyd
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Se-lett — product overview
Se-lett belongs to the alkyd system and is a one-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure; application and system notes are set out below.
Se-lett — positioning
Se-lett (0GP) is the alkyd primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
It is used for protective coating work in atmospheric exposure conditions.
Se-lett — key data
| Model | Se-lett |
|---|---|
| Manufacturer product name | 0GP |
| Resin system | alkyd |
| Components | one-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure |
| Colour range | Signal orange / yellow |
| Application method | airless spray / brush |
| Volume solids | 56 % ± 2 % |
| Density (specific gravity) | 1 kg/l |
| Flash point | 40 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-se-lett.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 5 h | 3 h | 2 h | 1 h |
| Walk-on dry | 25 h | 14 h | 7 h | 3 h |
| Recoat, minimum | 36 h | 18 h | 16 h | 12 h |
Data taken from the manufacturer's TDS jotun-se-lett.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- ISO 2813
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Se-lett — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Se-lett and the intended use.
Se-lett — common questions
Which substrates can Se-lett be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Se-lett?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Se-lett have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Se-lett
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Se-lett
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net