Pilot WF acrylic emulsion
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Pilot WF — product overview
This is a one-component acrylic emulsion product, typically used as primer / topcoat. It is characterised by fast-drying; service environment atmospheric exposure; suitable for protective coating of steel.
Pilot WF — positioning
Pilot WF belongs to the acrylic emulsion family of Jotun protective coatings and is used as primer / topcoat in atmospheric exposure service.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Where fast-drying are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Pilot WF — key data
| Model | Pilot WF |
|---|---|
| Manufacturer product name | 0WF |
| Resin system | acrylic emulsion |
| Components | one-component |
| Typical number of coats | primer / topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Volume solids | 39 % ± 2 % |
| Density (specific gravity) | 1.2 kg/l |
| Flash point | 101 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-pilot-wf.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 30 min | 25 min | 15 min |
| Walk-on dry | 2 h | 1 h | 1 h |
| Recoat, minimum | 3 h | 1.5 h | 1 h |
Data taken from the manufacturer's TDS jotun-pilot-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Pilot WF — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Pilot WF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Pilot WF — common questions
What are the key characteristics of Pilot WF?
This model offers fast-drying. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Pilot WF controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Pilot WF be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
Models related to Pilot WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Pilot WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net