Offshore steel structures and ship coating (heavy-duty)
Model

Pilot WF acrylic emulsion

A acrylic emulsion primer / topcoat in the Jotun range, Pilot WF (0WF) is selected for steel structures exposed to atmospheric exposure. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Pilot WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Pilot WF — product overview

This is a one-component acrylic emulsion product, typically used as primer / topcoat. It is characterised by fast-drying; service environment atmospheric exposure; suitable for protective coating of steel.

Pilot WF — positioning

Pilot WF belongs to the acrylic emulsion family of Jotun protective coatings and is used as primer / topcoat in atmospheric exposure service.

Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Where fast-drying are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Pilot WF — key data

ModelPilot WF
Manufacturer product name0WF
Resin systemacrylic emulsion
Componentsone-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure
Key characteristicsfast-drying
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids39 % ± 2 %
Density (specific gravity)1.2 kg/l
Flash point101 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-pilot-wf.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry30 min25 min15 min
Walk-on dry2 h1 h1 h
Recoat, minimum3 h1.5 h1 h

Data taken from the manufacturer's TDS jotun-pilot-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Pilot WF — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Pilot WF, send a request at the foot of this page, or contact us on WhatsApp or by email.

Pilot WF — common questions

What are the key characteristics of Pilot WF?

This model offers fast-drying. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Pilot WF controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Pilot WF be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Pilot WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Pilot WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat